diff --git a/GNUmakefile b/GNUmakefile
index 2a5da83..1d81b9f 100644
--- a/GNUmakefile
+++ b/GNUmakefile
@@ -1,5 +1,5 @@
 pkgname=amazon-ec2-net-utils
-version=2.7.1
+version=2.7.2
 
 # Used by 'install'
 PREFIX?=/usr/local
@@ -9,12 +9,13 @@ SYSTEMDDIR=${DESTDIR}/usr/lib/systemd
 SYSTEMD_SYSTEM_DIR=${SYSTEMDDIR}/system
 SYSTEMD_NETWORK_DIR=${SYSTEMDDIR}/network
 SHARE_DIR=${DESTDIR}/${PREFIX}/share/${pkgname}
+SYSCTLDIR=${DESTDIR}/etc/sysctl.d
 
 SHELLSCRIPTS=$(wildcard bin/*.sh)
 SHELLLIBS=$(wildcard lib/*.sh)
 UDEVRULES=$(wildcard udev/*.rules)
 
-DIRS:=${BINDIR} ${UDEVDIR} ${SYSTEMDDIR} ${SYSTEMD_SYSTEM_DIR} ${SYSTEMD_NETWORK_DIR} ${SHARE_DIR}
+DIRS:=${BINDIR} ${UDEVDIR} ${SYSTEMDDIR} ${SYSTEMD_SYSTEM_DIR} ${SYSTEMD_NETWORK_DIR} ${SHARE_DIR} ${SYSCTLDIR}
 
 .PHONY: help
 help: ## show help
@@ -37,6 +38,7 @@ install: ${SHELLSCRIPTS} ${UDEVRULES} ${SHELLLIBS} | ${DIRS} ## Install the soft
 	$(foreach f,${SHELLLIBS},tgt=${SHARE_DIR}/$$(basename $f);\
 		install -m644 $f $$tgt;${call varsubstlibs,$$tgt};)
 	$(foreach f,${UDEVRULES},install -m644 $f ${UDEVDIR};)
+	install -m644 sysctl/90-ena-tuning-defaults.conf ${SYSCTLDIR}/90-ena-tuning-defaults.conf
 	$(foreach f,$(wildcard systemd/network/*.network),install -m644 $f ${SYSTEMD_NETWORK_DIR};)
 	$(foreach f,$(wildcard systemd/system/*.service systemd/system/*.timer),install -m644 $f ${SYSTEMD_SYSTEM_DIR};)
 
diff --git a/amazon-ec2-net-utils.spec b/amazon-ec2-net-utils.spec
index 00fa68c..a67d96c 100644
--- a/amazon-ec2-net-utils.spec
+++ b/amazon-ec2-net-utils.spec
@@ -1,5 +1,5 @@
 Name:    amazon-ec2-net-utils
-%define  base_version 2.7.1
+%define  base_version 2.7.2
 %define  source_version %{base_version}%{?_source_version_suffix}
 Version: %{base_version}%{?_rpm_version_suffix}
 Release: 1%{?dist}
@@ -39,21 +39,35 @@ make install DESTDIR=%{buildroot} PREFIX=/usr
 %{_bindir}/set-hostname-imds
 %dir %{_datarootdir}/amazon-ec2-net-utils
 %{_datarootdir}/amazon-ec2-net-utils/lib.sh
+/etc/sysctl.d/90-ena-tuning-defaults.conf
 
 %post
 
-setup_policy_routes() {
+setup_interfaces() {
     local iface node
+    
+    # Apply global sysctl defaults for new interfaces
+    sysctl -p /etc/sysctl.d/90-ena-tuning-defaults.conf >/dev/null || true
+    
     for node in /sys/class/net/*; do
-	iface=$(basename $node)
-	unset ID_NET_DRIVER
-	eval $(udevadm info --export --query=property /sys/class/net/$iface)
-	case $ID_NET_DRIVER in
-	    ena|ixgbevf|vif)
-		systemctl restart policy-routes@${iface}.service
-		systemctl start refresh-policy-routes@${iface}.timer
-		;;
-	esac
+        iface=$(basename $node)
+        unset ID_NET_DRIVER
+        eval $(udevadm info --export --query=property /sys/class/net/$iface)
+        case $ID_NET_DRIVER in
+            ena|ixgbevf|vif)
+                # Apply per-interface sysctl tuning or else we need to reboot.
+                cat > /etc/sysctl.d/90-ena-tuning-${iface}.conf <<EOF
+# amazon-ec2-net-utils ENA tuning:
+net.ipv4.neigh.${iface}.delay_first_probe_time=1
+net.ipv4.neigh.${iface}.base_reachable_time_ms=5000
+net.ipv4.neigh.${iface}.retrans_time_ms=500
+net.ipv4.neigh.${iface}.ucast_solicit=0
+EOF
+                sysctl -p /etc/sysctl.d/90-ena-tuning-${iface}.conf >/dev/null || true
+                systemctl restart policy-routes@${iface}.service
+                systemctl start refresh-policy-routes@${iface}.timer
+            ;;
+        esac
     done
 }
 
@@ -68,15 +82,22 @@ if [ $1 -eq 1 ]; then
     if [ -d /run/systemd/system ]; then
 	systemctl stop NetworkManager.service
 	systemctl start systemd-networkd.service
-	setup_policy_routes
+	setup_interfaces
 	systemctl start systemd-resolved.service
     fi
 elif [ $1 -gt 1 ]; then
     # This is an upgrade, there's less setup to do, but we do want to
     # ensure we apply any configuration introduced by the new version
     systemctl daemon-reload
-    setup_policy_routes
+    setup_interfaces
 fi
 
-%changelog
+%postun
+# Make sure to config is revertable upon downgrade if something goes south.
+if [ -f /etc/sysctl.d/90-ena-tuning-defaults.conf ]; then
+    rm -f /etc/sysctl.d/90-ena-tuning-defaults.conf
+fi
+rm -f /etc/sysctl.d/90-ena-tuning-*.conf
+sysctl --system >/dev/null || true
 
+%changelog
\ No newline at end of file
diff --git a/sysctl/90-ena-tuning-defaults.conf b/sysctl/90-ena-tuning-defaults.conf
new file mode 100644
index 0000000..c890b26
--- /dev/null
+++ b/sysctl/90-ena-tuning-defaults.conf
@@ -0,0 +1,6 @@
+# ENA tuning for EC2 networking
+net.ipv4.neigh.default.delay_first_probe_time=1
+net.ipv4.neigh.default.base_reachable_time_ms=5000
+net.ipv4.neigh.default.retrans_time_ms=500
+net.ipv4.neigh.default.ucast_solicit=0
+net.ipv4.tcp_syn_retries=3