Various tools for raspberry Pi setup.

Usefull script to connect eduroam network using raspberry pi for IOT , remote control and etc ..

Tested and verified using raspberrypi os Buster and below , please dont use > buster .

Upcoming update , restore file to original in case something going wrong.

· Documentation · How to enable rc.local . Report Bug · Request Feature

📔 Table of Contents

• About the Project
• Contributing
• FAQ
• License

🌟 About the Project

🎯 Features

• Connect eduroam using just a script
• Easily get ip address from connected eduroam wifi when raspberry pi boot up and send it to telegram bot

🧰 Getting Started

⚙️ Installation

To use eduroam.sh , Assume you already in root env. If not , use below code to get root :

sudo -i

after that use raspi-config type in your raspberry pi terminal to change your wifi country , Localization -> wlan country:

raspi-config

To connect to eduroam , if you have internet connection , use this command :

wget https://raw.githubusercontent.com/UntaDotMy/Rasp-Setup-4-script/main/eduroam.sh && chmod +x eduroam.sh && ./eduroam.sh

if you dont have internet connection in your raspberry pi , make a new file , then copy the code inside eduroam.sh and save it in .sh

nano <yourfilename>.sh

make sure to validate your information otherwise the wifi will be not connected . Lastly , reboot your raspberrypi , and your raspberry pi will be automatically connected to eduroam network . Good Luck !

sudo reboot

ℹ️ : To get your ipv4 information from connected eduroam to telegram bot.

First , go to BotFather and make your own bot . give unique name so u can remember . grab the token , we need it later in configuration.

Second , go to this website copy and paste your token in the url, replace according to your bot token.

http://api.telegram.org/bot<token>/getupdates

Third , start your bot in telegram , and just chat anything to your bot. and refresh the website, you will get the chat id (id from message).

Fourth , grab your token and chat id , copy it into notepad.

Fifth , download the file using wget in your teminal (Copy Paste)

wget https://raw.githubusercontent.com/UntaDotMy/Rasp-Setup-4-script/main/info2tele.sh && chmod +x info2tele.sh

Sixth , open up info2tele.sh using nano (text editor) and put your token and chat id in it.

nano info2tele.sh

Lastly , we need in to run at boot , so it will send the ipv4 information to your telegram bot.

first , open up rc.local .

nano /etc/rc.local

second , put below code before the exit 0.

/root/info2tele.sh

save the file with ctrl+x and then y and enter. and reboot .

sudo reboot 

you should get the network ipv4 information send to your telegram when the raspberry pi connected to the eduroam .

Have fun do your project !

👋 Contributing

Contributions are always welcome!

❔ FAQ

• Why it said Wi-Fi is currently blocked by rfkill , after i reboot ?

- You need to configure your wlan country code before you can use WiFi . Follow second step above .

• After reboot , i dont get the chat from my telegram bot , do i did wrong ?

- try enable the rc local service , see above for How to enable rc.local .

• My clock not syncronize , i have internet , how to syncronize ?

- sudo apt install htpdate

⚠️ License

Distributed under the no License. See LICENSE.txt for more information.