Skip to content

air: Fit air list to narrow terminals by compacting and then hiding columns - #7629

Merged
dimk0 merged 4 commits into
mainfrom
air-list-narrow-columns
Nov 17, 2026
Merged

dimk0 merged 4 commits into
mainfrom
air-list-narrow-columns

Conversation

@dimk0

@dimk0 dimk0 commented Nov 14, 2026 •

Copy link
Copy Markdown
Member

Changes

Follow-up to #7583. The interactive databricks air list table shrank Experiment and User to their floors, but every other column kept a fixed or content width, so below about 134 columns the rightmost columns were still cut off (Progress at 80 columns, Accelerators and most of User at 120).

When the table is still too wide once Experiment and User reach their floors, two more tiers now apply, in order:

  1. Compact. Started switches to MM-DD HH:MM (11 cells instead of 19) and the MLflow column is sized to its widest stored label instead of a fixed 22 cells. The stored labels are not re-truncated, so they keep their end and their retry note (air: Shorten MLflow run names and IDs the same way in air list #7582).
  2. Hide. Whole columns are dropped lowest priority first (Accelerators, then User, then MLflow, then Progress) until the table fits or nothing is left to hide. The hint line names the hidden columns, e.g. hidden: MLflow, User, Accelerators. The hint must itself fit the terminal, or bubbletea cuts off its end (where the loading / load-failed state sits), so it gives up detail in steps: the legend shortens to ↑/↓ ←/→ ↵ i L q, then the hidden columns are counted (3 columns hidden), then the legend goes, and as a last resort the line is truncated. The row counter and paging state come first, so they survive every step. The variant is chosen for the widest row counter and the loading state, so it does not flip as the cursor moves or a page loads.

After each step the spare cells go back to Experiment and User, so they widen again rather than staying at the floors. Enter still opens the row's MLflow link when the MLflow column is hidden. Lazily loaded pages are laid out against the same width; since a new page can only widen the natural columns, the layout moves one way as pages load (a column may compact or disappear mid-scroll, never reappear).

Unchanged:

  • The one-shot table (piped, NO_COLOR, --limit) is byte-for-byte the same.
  • A terminal wide enough for today's table renders exactly as it does today.

Implementation: listCols gains a listColumn enum, an mlflow width, a compactStarted flag and a hidden bitmask; layoutListCols(rows, width) runs the tiers; the header and row renderers iterate the enum and skip hidden columns.

Before / after at 80 columns (e2-dogfood)

Before:

   Run ID            Experiment    Status      Started              Duration  Pr
▸  215643000685172   …b8dfeedf62e  ● SUCCESS   2026-11-14T01:48:45    3m 13s

After:

   Run ID            Experiment      Status      Started      Duration  Progress
▸  392039360633569   …g-v14-1114-v2  ● FAILED    11-14 02:26    6m 53s         -
   215643000685172   …51b8dfeedf62e  ● SUCCESS   11-14 01:48    3m 13s         -
↑/↓ ←/→ ↵ i L q  ·  row 1/20  ·  hidden: MLflow, User, Accelerators

At 120 columns only Accelerators is hidden; at 133 the compact tier alone fits with every column shown; at 134 and above the layout is unchanged.

Why

The open question was whether to compact the fixed columns or hide low-priority ones. Both are needed: with real data most MLflow labels are already the full 22 cells, so compacting alone only covers terminals from 126 to 133 columns. Hiding is what gets 80 and 100 columns to a readable table.

Tests

  • New unit tests: TestLayoutListCols (0, 60, 80, 100, 120, 133, 160, 200 columns with short MLflow labels), TestLayoutListColsFullLabels (100, 120, 125, 126, 133 columns with 22-cell labels, the widest list.go produces and the usual case for MLflow-named runs), TestLayoutListColsMovesOneWayAsPagesLoad, TestLayoutListColsMLflowFloorIsHeader, TestLayoutListColsCapsMLflowAtColumnWidth, TestStartedCompact, TestHiddenNote, TestRenderHidesColumns, TestListModelNarrowTerminalHidesColumns, TestListModelHintNamesHiddenColumnsWithFullLegend, TestListModelHintFitsNarrowTerminal (40, 46, 70, 75, 80, 100 columns, 120 rows, idle / loading / load failed), TestListModelRelayoutsLoadedPageInNarrowTerminal, TestListModelEnterOpensMLflowLogsWhenColumnHidden. The existing TestStaticListTableIgnoresTerminalWidth and TestListColsFitWidth still pass unchanged.
  • Ran the built CLI in a real pty at 70, 75, 80, 100, 120, 133, 134 and 160 columns against the e2-dogfood profile with air list --all-status --all-users: no table or hint line exceeds the terminal width at any size, and 134 and 160 match the main build.
  • Diffed piped output and --limit output in a pty between the main build and this branch: identical.
  • golangci-lint run ./cmd/air/... clean.

This pull request and its description were written by Isaac.

dimk0 and others added 2 commits November 14, 2026 02:40
… columns

After #7583 the interactive table shrinks Experiment and User to their
floors, but the other columns keep fixed widths, so below about 134
columns the rightmost columns are still cut off.

When the table is still too wide at the floors, two more tiers apply:

1. Compact: Started becomes `MM-DD HH:MM` and the MLflow column is sized
   to its widest stored label instead of a fixed 22 cells. Labels are not
   re-truncated, so they keep their end and retry note (#7582).
2. Hide: whole columns are dropped lowest priority first (Accelerators,
   User, MLflow, Progress) until the table fits. The hint line names the
   hidden columns; when the full key legend and that note do not both fit,
   the legend shortens to its keys.

After each step the spare cells go back to Experiment and User. Enter
still opens the row's MLflow link when the MLflow column is hidden.

The one-shot table (piped, NO_COLOR, --limit) and terminals wide enough
for today's table render exactly as before.

Verified with unit tests at 80, 100, 120, 133, 160 and 200 columns and by
running the CLI in a pty at those widths against e2-dogfood.

CNXT-2619

Co-authored-by: Isaac <no-reply@databricks.com>
Co-authored-by: Isaac <no-reply@databricks.com>
@github-actions github-actions Bot added the AIR Databricks AI Runtime CLI label Nov 14, 2026
@eng-dev-ecosystem-bot

eng-dev-ecosystem-bot commented Nov 14, 2026 •

Copy link
Copy Markdown
Collaborator

✅ Integration test report

Commit: 74de95f

Run: 43552943503

Env 💚​RECOVERED ✅​pass 🙈​skip Time
💚​ aws linux-2core-8gb 1 270 15 3:58
💚​ aws-windows-latest-4core-16gb 1 272 13 2:59
💚​ azure linux-2core-8gb 1 269 15 3:20
💚​ azure-windows-latest-4core-16gb 1 271 13 2:50
💚​ gcp linux-2core-8gb 1 270 15 3:30
💚​ gcp-windows-latest-4core-16gb 1 272 13 2:46
Test Name aws linux-2core-8gb aws-windows-latest-4core-16gb azure linux-2core-8gb azure-windows-latest-4core-16gb gcp linux-2core-8gb gcp-windows-latest-4core-16gb
💚​ TestAccept 💚​R 💚​R 💚​R 💚​R 💚​R 💚​R
Top 3 slowest tests (at least 2 minutes):
duration env testname
2:54 aws-windows-latest-4core-16gb TestAccept
2:45 azure-windows-latest-4core-16gb TestAccept
2:39 gcp-windows-latest-4core-16gb TestAccept

dimk0 and others added 2 commits November 14, 2026 03:32
…Lflow label width

Review follow-ups for #7629.

The hint line could still run past the terminal, and bubbletea cut off
its end, which is where the loading / load-failed state sat. The hint
now gives up detail in steps until it fits: the legend shrinks to its
keys, then the hidden columns are counted instead of named, and as a
last resort the line is truncated. The variant is chosen for the widest
row counter and the loading state, so it does not flip as the cursor
moves or a page loads.

Tests now also cover the production case where every MLflow label is
the full 22 cells, the Progress tier, the still-too-wide case, a page
load that crosses a tier, the selected row in a reduced layout, and the
hint at 70, 75, 80 and 100 columns in every paging state.

Also: cap the compact MLflow width at mlflowColWidth, show a non-ISO
start timestamp as is instead of slicing it, decide right alignment in
one place, drop the duplicated link check in mlflowCell, and trim doc
comments.

Co-authored-by: Isaac <no-reply@databricks.com>
…as no room for a legend

Below the width where even the short legend fits, the hint now drops the
legend before truncating, so the row counter and loading / load-failed
state stay visible. Also test the MLflow width cap, compare whole hints
in the stability check, and say that mlflowColWidth is the widest label
list.go produces rather than the only one.

Co-authored-by: Isaac <no-reply@databricks.com>
@dimk0
dimk0 marked this pull request as ready for review November 14, 2026 04:03
@dimk0
dimk0 requested review from a team as code owners November 14, 2026 04:03
@dimk0
dimk0 requested a review from rugpanov November 14, 2026 04:03

@maggiewang-db maggiewang-db left a comment

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Nit: Don't mention internal jira tickets in open source repo.

@dimk0
dimk0 added this pull request to the merge queue Nov 17, 2026
Merged via the queue into main with commit 1715caa Nov 17, 2026
28 checks passed
@dimk0
dimk0 deleted the air-list-narrow-columns branch November 17, 2026 04:17
@eng-dev-ecosystem-bot

Copy link
Copy Markdown
Collaborator

❌ Integration test report

Commit: 1715caa

Run: 44016250387

Env ❌​FAIL 🟨​KNOWN 🔄​flaky 💚​RECOVERED ✅​pass 🙈​skip Time
❌​ aws linux-2core-8gb 9 1 2 10 1613 1335 193:15
💚​ aws-windows-latest-4core-16gb 13 1541 1362 202:11
❌​ azure linux-2core-8gb 9 1 4 12 1589 1343 219:16
🔄​ azure-windows-latest-4core-16gb 3 12 1519 1370 210:17
❌​ gcp linux-2core-8gb 9 1 12 1600 1341 196:12
💚​ gcp-windows-latest-4core-16gb 13 1528 1368 202:20
28 interesting tests: 10 RECOVERED, 9 FAIL, 8 flaky, 1 KNOWN
Test Name aws linux-2core-8gb aws-windows-latest-4core-16gb azure linux-2core-8gb azure-windows-latest-4core-16gb gcp linux-2core-8gb gcp-windows-latest-4core-16gb
🟨​ TestAccept 🟨​K 💚​R 🟨​K 🔄​f 🟨​K 💚​R
❌​ TestAccept/bundle/config-remote-sync/cluster_policy_cross_target ❌​F 🙈​s ❌​F 🙈​s ❌​F 🙈​s
❌​ TestAccept/bundle/config-remote-sync/cluster_policy_cross_target/DMS= ❌​F ❌​F ❌​F
❌​ TestAccept/bundle/config-remote-sync/cluster_policy_cross_target/DMS=true ❌​F ❌​F ❌​F
❌​ TestAccept/bundle/config-remote-sync/cluster_policy_remote_addition ❌​F 🙈​s ❌​F 🙈​s ❌​F 🙈​s
❌​ TestAccept/bundle/config-remote-sync/cluster_policy_remote_addition/DMS= ❌​F ❌​F ❌​F
❌​ TestAccept/bundle/config-remote-sync/cluster_policy_remote_addition/DMS=true ❌​F ❌​F ❌​F
🔄​ TestAccept/bundle/config-remote-sync/multiple_resources ✅​p 🙈​s 🔄​f 🙈​s ✅​p 🙈​s
🔄​ TestAccept/bundle/config-remote-sync/multiple_resources/DMS= ✅​p 🔄​f ✅​p
❌​ TestAccept/bundle/config-remote-sync/policy_injected_cluster_fields ❌​F 🙈​s ❌​F 🙈​s ❌​F 🙈​s
❌​ TestAccept/bundle/config-remote-sync/policy_injected_cluster_fields/DMS= ❌​F ❌​F ❌​F
❌​ TestAccept/bundle/config-remote-sync/policy_injected_cluster_fields/DMS=true ❌​F ❌​F ❌​F
🔄​ TestAccept/bundle/invariant/continue_293 ✅​p ✅​p 🔄​f ✅​p ✅​p ✅​p
🔄​ TestAccept/bundle/invariant/continue_293/DMS=/INPUT_CONFIG=app.yml.tmpl ✅​p ✅​p 🔄​f ✅​p ✅​p ✅​p
💚​ TestAccept/bundle/resources/apps/lifecycle-started 💚​R 💚​R 💚​R 💚​R 💚​R 💚​R
💚​ TestAccept/bundle/resources/apps/lifecycle-started-omitted 💚​R 💚​R 💚​R 💚​R 💚​R 💚​R
💚​ TestAccept/bundle/resources/apps/lifecycle-started-omitted/DMS= 💚​R 💚​R 💚​R 💚​R 💚​R 💚​R
💚​ TestAccept/bundle/resources/apps/lifecycle-started-omitted/DMS=true 💚​R 💚​R 💚​R 💚​R 💚​R 💚​R
💚​ TestAccept/bundle/resources/apps/lifecycle-started-toggle 💚​R 💚​R 💚​R 💚​R 💚​R 💚​R
💚​ TestAccept/bundle/resources/apps/lifecycle-started-toggle/DMS= 💚​R 💚​R 💚​R 💚​R 💚​R 💚​R
💚​ TestAccept/bundle/resources/apps/lifecycle-started-toggle/DMS=true 💚​R 💚​R 💚​R 💚​R 💚​R 💚​R
💚​ TestAccept/bundle/resources/apps/lifecycle-started/DMS= 💚​R 💚​R 💚​R 💚​R 💚​R 💚​R
💚​ TestAccept/bundle/resources/apps/lifecycle-started/DMS=true 💚​R 💚​R 💚​R 💚​R 💚​R 💚​R
🔄​ TestAccept/bundle/resources/postgres_synced_tables/recreate 🔄​f 💚​R 💚​R 💚​R 💚​R 💚​R
🔄​ TestAccept/bundle/resources/postgres_synced_tables/recreate/DMS= 🔄​f 💚​R 💚​R 💚​R 💚​R 💚​R
💚​ TestAccept/bundle/resources/postgres_synced_tables/recreate/DMS=true 💚​R 💚​R 💚​R 💚​R 💚​R 💚​R
🔄​ TestAccept/bundle/templates/default-python/integration_classic ✅​p ✅​p ✅​p 🔄​f ✅​p ✅​p
🔄​ TestAccept/bundle/templates/default-python/integration_classic/DMS=/UV_PYTHON=3.9 ✅​p ✅​p ✅​p 🔄​f ✅​p ✅​p
Top 50 slowest tests (at least 2 minutes):
duration env testname
13:51 gcp-windows-latest-4core-16gb TestAccept/bundle/resources/apps/lifecycle-started/DMS=true
12:28 aws linux-2core-8gb TestAccept/bundle/resources/clusters/lifecycle-started/DMS=
12:02 azure linux-2core-8gb TestAccept/bundle/config-remote-sync/multiple_resources/DMS=
11:54 azure linux-2core-8gb TestAccept/bundle/config-remote-sync/multiple_resources/DMS=true
11:37 gcp linux-2core-8gb TestAccept/bundle/resources/apps/lifecycle-started/DMS=true
11:23 gcp linux-2core-8gb TestAccept/bundle/resources/apps/lifecycle-started/DMS=
11:12 gcp-windows-latest-4core-16gb TestAccept/bundle/resources/apps/lifecycle-started/DMS=
10:58 azure linux-2core-8gb TestAccept/bundle/resources/clusters/lifecycle-started/DMS=
10:05 azure linux-2core-8gb TestAccept/bundle/resources/clusters/lifecycle-started-toggle/DMS=true
9:38 aws linux-2core-8gb TestAccept/bundle/resources/apps/lifecycle-started/DMS=true
9:35 aws-windows-latest-4core-16gb TestAccept/bundle/resources/apps/lifecycle-started/DMS=true
9:25 azure-windows-latest-4core-16gb TestAccept/bundle/resources/apps/lifecycle-started/DMS=
8:49 aws-windows-latest-4core-16gb TestAccept/bundle/resources/apps/lifecycle-started/DMS=
8:39 azure linux-2core-8gb TestAccept/bundle/resources/apps/lifecycle-started/DMS=true
8:37 azure linux-2core-8gb TestAccept/bundle/resources/apps/lifecycle-started/DMS=
8:37 aws-windows-latest-4core-16gb TestAccept/bundle/resources/clusters/lifecycle-started/DMS=true
8:36 aws linux-2core-8gb TestAccept/bundle/resources/apps/lifecycle-started/DMS=
8:04 gcp linux-2core-8gb TestAccept/bundle/resources/clusters/deploy/local_ssd_count/DMS=true
8:03 azure linux-2core-8gb TestAccept/bundle/resources/clusters/lifecycle-started-toggle/DMS=
7:59 azure-windows-latest-4core-16gb TestAccept/bundle/resources/apps/lifecycle-started/DMS=true
7:50 aws-windows-latest-4core-16gb TestAccept/bundle/resources/clusters/lifecycle-started/DMS=
7:40 gcp-windows-latest-4core-16gb TestAccept/bundle/resources/clusters/deploy/local_ssd_count/DMS=
7:34 gcp linux-2core-8gb TestAccept/bundle/resources/clusters/deploy/local_ssd_count/DMS=
7:24 azure linux-2core-8gb TestAccept/bundle/resources/clusters/resize-terminated-fallback/DMS=true
7:23 gcp linux-2core-8gb TestAccept/bundle/resources/clusters/lifecycle-started/DMS=true
7:19 gcp-windows-latest-4core-16gb TestAccept/bundle/resources/clusters/lifecycle-started/DMS=true
7:01 gcp-windows-latest-4core-16gb TestAccept/bundle/resources/clusters/deploy/local_ssd_count/DMS=true
7:01 gcp-windows-latest-4core-16gb TestAccept/bundle/resources/clusters/lifecycle-started/DMS=
6:59 gcp linux-2core-8gb TestAccept/bundle/resources/clusters/lifecycle-started/DMS=
6:51 gcp linux-2core-8gb TestAccept/bundle/config-remote-sync/multiple_resources/DMS=true
6:49 gcp linux-2core-8gb TestAccept/bundle/config-remote-sync/multiple_resources/DMS=
6:48 aws linux-2core-8gb TestAccept/bundle/invariant/no_drift/DMS=true/INPUT_CONFIG=cluster_apply_policy_default_values.yml.tmpl/READPLAN=1
6:42 azure linux-2core-8gb TestAccept/bundle/resources/clusters/lifecycle-started/DMS=true
6:22 aws linux-2core-8gb TestAccept/bundle/invariant/no_drift/DMS=true/INPUT_CONFIG=cluster_apply_policy_default_values.yml.tmpl/READPLAN=
6:11 azure-windows-latest-4core-16gb TestAccept/bundle/resources/clusters/lifecycle-started/DMS=true
6:04 azure-windows-latest-4core-16gb TestAccept/bundle/resources/clusters/lifecycle-started-toggle/DMS=
5:56 aws linux-2core-8gb TestAccept/bundle/resources/clusters/lifecycle-started/DMS=true
5:25 aws linux-2core-8gb TestAccept/bundle/resources/clusters/lifecycle-started-toggle/DMS=true
5:24 aws linux-2core-8gb TestAccept/bundle/deploy/spark-jar-task/DMS=
5:02 azure-windows-latest-4core-16gb TestAccept/bundle/resources/clusters/lifecycle-started/DMS=
5:01 gcp-windows-latest-4core-16gb TestAccept/bundle/resources/clusters/lifecycle-started-toggle/DMS=true
4:59 gcp linux-2core-8gb TestAccept/bundle/resources/clusters/lifecycle-started-toggle/DMS=true
4:58 gcp linux-2core-8gb TestAccept/bundle/resources/clusters/lifecycle-started-toggle/DMS=
4:48 gcp-windows-latest-4core-16gb TestAccept/bundle/resources/clusters/lifecycle-started-toggle/DMS=
4:48 aws linux-2core-8gb TestAccept/bundle/deploy/spark-jar-task/DMS=true
4:41 gcp linux-2core-8gb TestAccept/bundle/resources/apps/inline_config/DMS=true
4:38 azure-windows-latest-4core-16gb TestAccept/pipelines/run/refresh-flags
4:19 azure linux-2core-8gb TestAccept/bundle/deploy/spark-jar-task/DMS=true
4:19 azure-windows-latest-4core-16gb TestAccept/bundle/deploy/spark-jar-task/DMS=true
4:18 gcp-windows-latest-4core-16gb TestAccept/bundle/deploy/spark-jar-task/DMS=true

deco-sdk-tagging Bot added a commit that referenced this pull request Nov 19, 2026
## Release v1.27.0

### Notable Changes

 * `databricks aitools install`, `update` and `uninstall` now exit with code 1 when they do nothing they were asked to. `install` fails when it sets up nothing: no coding agent is detected, every agent is skipped or fails to install, or no skill in the release can be installed (also with `--path`). `update` fails when every update or check it attempts fails, and `uninstall` when every removal it attempts fails. Scripts that ran these commands as a best-effort step and relied on exit code 0 should handle the new exit code. ([#7481](#7481))
 * Add `file:<path>` selectors to `pipelines run` and pipeline `bundle run`. `--refresh` and `--full-refresh` now use space-separated lists, such as `--refresh "orders payments"`, instead of comma-separated lists. Single names containing spaces now require backticks, e.g. ``--refresh 'table:`order details`'``. ([#7184](#7184))
 * The Databricks CLI is now available on PyPI as `databricks`: run it with `uvx databricks`, or install it with `uv tool install databricks`, `pipx install databricks` or `pip install databricks`. The package contains only the prebuilt CLI binary. Uninstall the legacy `databricks-cli` package first, since both install a `databricks` command. ([#7704](#7704), [#7777](#7777))

### CLI

 * Add `databricks sandbox fs` commands (`cp`, `ls`, `cat`, `mkdir`, `rm`) to transfer files between your local filesystem and sandboxes using `<sandbox-id>:/path`. ([#7372](#7372))
 * `databricks fs` commands retry reads (stat, list, open) and deletes on DBFS and Volumes when the server returns a transient error or does not respond within the HTTP timeout. ([#7556](#7556))
 * Retry UC Volumes file operations (`fs cp`, `fs ls`, `fs rm`, bundle uploads to Volumes) when the Files API returns HTTP 408, 429, 502, 503 or 504 (for example "AWS S3 is throttling requests"), or on a transient network error; this regressed in v1.10.0. ([#7559](#7559))
 * Stop warning when the host metadata request (`/.well-known/databricks-config`) times out; the CLI already falls back to your config, and the message is still shown with `--debug`. ([#7752](#7752))
 * Add `databricks aitools auto-install disable` and `enable` to turn off (or back on) the automatic installation of Databricks AI tools on CLI upgrades. A global-scope `databricks aitools uninstall` also turns it off. ([#7701](#7701))
 * Stop printing the Databricks AI tooling install hint on `auth`, `configure`, `current-user me`, `version`, `help`, and shell-completion commands. ([#7452](#7452))
 * When Codex, Cursor, GitHub Copilot CLI, OpenCode, Gemini CLI, Antigravity, Pi, Goose or Kiro run the CLI without Databricks skills installed for that agent, the CLI now prints a one-line hint to install them with `databricks aitools install --agents <agent> --scope global`, previously shown only to Claude Code. ([#7586](#7586))
 * `databricks aitools install` now rejects an unknown `--agents` name before it shows the scope prompt, instead of after. ([#7469](#7469))
 * `databricks aitools install` no longer asks "Proceed?" after the agent picker; the picker selection confirms the plan. The picker title now shows the install scope, its hint says Enter installs, `--skills-only` runs label plugin agents "skills" and pre-check every agent whose config dir exists, and the plan summary after it is reduced to the scope line. ([#7478](#7478))
 * `databricks aitools install --output json` reports more specific `error_category` values: `SKILLS_FETCH_FAILED`, `RELEASE_LOOKUP_FAILED`, `RATE_LIMITED`, `MANIFEST_INVALID`, `STATE_INVALID` and `PLUGIN_CLI_TIMEOUT`. A coding agent CLI that does not answer in time is now reported as `timed out after <duration>`, followed by any stderr it wrote before it was stopped. ([#7475](#7475))
 * `databricks aitools install` no longer prompts when a coding agent runs it, even in a pseudo-terminal; it uses the non-interactive defaults instead and prints a note saying so. ([#7477](#7477))
 * `databricks aitools install` now prints the directory it installed skills into (for example `Installed 1 skill in ~/.databricks/aitools/skills.`), so agents can open the installed `SKILL.md` files without searching for them. ([#7668](#7668))
 * `databricks aitools install` now ends a failed install with a step to recover, in the text output and in a new `recovery` field of `--output json`. ([#7480](#7480))
 * `databricks aitools install` now installs plugins for the other coding agents even when installing skill files fails. ([#7479](#7479))
 * `databricks aitools install` now installs skill files for a detected coding agent whose CLI is not on PATH (for example a Claude Code desktop or IDE install), unless it already has the plugin, says how to switch to the plugin later, and warns when the current project also has the plugin. `databricks aitools update` no longer tries to install the plugin for such an agent, and no longer writes skill files next to a plugin that such an agent already has. ([#7482](#7482))
 * Fix `databricks aitools install` waiting a long time on an unreachable or slow workspace while it resolves authentication for telemetry; that wait is now limited to a few seconds. ([#7468](#7468))
 * `databricks aitools install`, `update` and `list` now refuse a skills manifest that names a skill or file outside the skills directory, before writing any skill files. A skill whose name or file paths are not portable is skipped with a warning, and `update` keeps its installed copy. ([#7722](#7722))
 * `databricks aitools install` and `databricks aitools update` refresh only the marketplace the Databricks plugin is listed in, so another unreachable marketplace no longer blocks them. When that refresh fails, both commands warn, install or update the plugin from the local copy of the marketplace, and record the plugin version as unknown. ([#7473](#7473))
 * `databricks aitools install` and `databricks aitools update` now wait up to 20 seconds instead of 5 for a coding agent's CLI to answer the plugin capability check, so a slow first start is less likely to report the agent as unavailable. ([#7472](#7472))
 * `databricks aitools install` no longer fails a plugin-only install when the lookup of the latest skills release on GitHub fails or is rate-limited. The plugin is installed and its version is recorded as unknown. ([#7474](#7474))
 * `databricks aitools` commands now send usage telemetry, and the CLI records when it recommends installing Databricks AI tools. When the configured workspace is slow or unreachable, `aitools install`, `update` and `uninstall` can take up to about 6 seconds longer, and `list`, `version` and runs that stop early up to about 3 seconds. Set `DATABRICKS_CLI_DISABLE_TELEMETRY=1` to opt out. ([#7467](#7467), [#7469](#7469), [#7470](#7470))
 * `databricks aitools install` and `databricks aitools update` now report a coding agent CLI shim (`.cmd` or `.bat`) on Windows that prints its plugin help and then exits with an error as `shim-exited-with-error`, with the command to run to see the error, instead of reporting the CLI as not on PATH. ([#7476](#7476))
 * `apps init` no longer suggests installing skills when every detected coding agent already has the Databricks plugin. ([#7467](#7467))
 * `databricks auth login` now gives up on the optional workspace lookup after about 5 seconds instead of retrying for about 5 minutes, and explains the fallback to the manual workspace ID prompt. ([#7522](#7522))
 * Throttle Claude Code's native plugin install hint separately from the text hint: it prints at most once per 10 minutes per session, so the install dialog still comes up when a subagent, a hook, or a command outside a Claude Code subprocess runs the session's first `databricks` command. ([#7692](#7692))
 * Print Claude Code's native plugin install hint alongside the text hint, so Claude Code offers a one-click install of the Databricks plugin. Claude Code now counts as having the tooling only when it loads it: skills only in `~/.databricks/aitools/skills` don't count, and a project- or local-scope plugin counts only when the CLI runs inside that project. `auth token`, `auth docker token` and CLI subprocesses no longer print install hints. ([#7585](#7585))
 * Interactive prompts and pagers now work in Git for Windows' bash and other MSYS2 shells when they run under ConPTY (the default since Git for Windows 2.47) or directly in a Windows console. ([#7699](#7699))
 * Add the `databricks feedback` command to send feedback about the CLI to Databricks. ([#7724](#7724))
 * Fix shell completion in `databricks fs` commands for local paths typed with a leading `./` or repeated separators, which previously offered no suggestions. ([#7679](#7679))
 * Fix a panic in `databricks labs` commands when a non-string SDK setting such as `DATABRICKS_DEBUG_HEADERS` or `DATABRICKS_RATE_LIMIT` is set in the environment. ([#7673](#7673))
 * Fix a panic in `databricks labs install` for projects whose `labs.yml` has no `install` section. ([#7673](#7673))
 * `NO_COLOR` no longer disables prompts, spinners or the list pager; they run without color. ([#7700](#7700))
 * Add the Beta `databricks pipelines test` command, which runs the tests of a pipeline, and the `testing` property of pipelines in bundles. ([#7429](#7429))
 * Add `databricks sandbox forward`, which serves an app running in a sandbox at a local URL. ([#7395](#7395))
 * Bound the whole telemetry upload at exit, including config resolution and authentication, by its timeout, so a stalled auth or telemetry endpoint no longer keeps a command from exiting. ([#7467](#7467))
 * `databricks version --check` now suggests `databricks aitools install` on stderr when a coding agent is detected without the Databricks plugin or skills. ([#7471](#7471))

### AI Runtime

 * `air get -o json` now reports `PENDING` while the run waits for compute, matching `air list`, and includes the run's `status_message`. ([#7455](#7455))
 * Wrap long failure reasons and log lines in the `air list` info and logs panes, keep the MLflow link (labeled with its retry) when a run's last retry failed before starting, and point `air logs` at earlier retries when the last one has no logs. ([#7456](#7456))
 * `databricks air logs --node` now reports an out-of-range node index when it can determine the run's node count, instead of looking like a successful run with no logs. ([#7516](#7516))
 * Add experiment, duration, accelerator, and dashboard metadata to `air list --output json`. For retried runs, `started_at` now reports the latest attempt, matching `air get`. ([#7568](#7568))
 * `air list` shortens MLflow run names and unnamed-run IDs by keeping their end behind a leading `…`, and its columns no longer overflow on wide (for example CJK) text; `air get` shows an unnamed run's full MLflow run ID. ([#7582](#7582))
 * Shrink the Experiment and User columns of the interactive `air list` table to fit the terminal width, keeping the end of a shortened experiment name. ([#7583](#7583))
 * Show the experiment, accelerators and configuration in the `air list` info pane for runs where it showed `N/A`. ([#7587](#7587))
 * Strip terminal control characters from the MLflow run, experiment and user names shown by `air list` and `air get`, so a run name cannot clear or retitle the terminal of whoever lists it. ([#7601](#7601))
 * `air logs`, `air get`, and `air run --watch` no longer make an extra credential-check request before fetching the run, and `air get` reuses the configured workspace ID instead of looking it up. ([#7613](#7613))
 * `air list` no longer waits on extra current-user requests before listing runs, which makes the default list about 150ms faster. ([#7615](#7615))
 * `air list --all-status` requests larger index pages, so it makes far fewer round trips once the server supports `page_size`. ([#7616](#7616))
 * Fit the interactive `air list` table to narrow terminals: when the Experiment and User columns are at their floors, shorten Started to `MM-DD HH:MM` and size the MLflow column to its labels, then hide Accelerators, User, MLflow and Progress in that order, naming the hidden columns in the hint line. ([#7629](#7629))
 * `air get -o json` now includes `mlflow_run_id` and `mlflow_experiment_id`, so a run can be handed to MLflow-based steps without parsing `mlflow_url`. They identify the MLflow run `mlflow_url` links to, including one from an earlier retry that `mlflow_retry` names. ([#7636](#7636))
 * `air get` and the `air list` info pane now show the environment of runs on the Databricks AI environment (`databricks_ai_v*`) instead of `N/A`. ([#7637](#7637))
 * `air run` now rejects a `code_source.include_paths` path that selects no files instead of uploading a snapshot without it; glob patterns and pathspec magic are left to git. ([#7643](#7643))
 * `air convert-to-dabs` now suggests the `--output-dir` that converts a working-tree workload whose `code_source.root_path` is outside the bundle directory, instead of suggesting `sync.paths`. ([#7644](#7644))
 * `air run` now lists a `code_source.root_path` outside a git repository relative to `root_path`, so running from a subdirectory of `root_path` no longer uploads an empty or partial snapshot. ([#7646](#7646))
 * `air list --all-status` now fills `--limit` past purged or inaccessible indexed runs. ([#7743](#7743))
 * `air run` now warns about missing PyTorch when a pinned snapshot's `include_paths` selects a Python file. ([#7744](#7744))
 * `air cancel JOB_RUN_ID` now rejects run IDs that are not AI Runtime runs instead of cancelling unrelated Jobs runs. In `-o json` output, the `failed[].error` text for a run that does not exist or that you cannot view now starts with `failed to get run <id>:` instead of the cancel API error. ([#7569](#7569))
 * `air get -o json` now reports `mlflow_retry` when the MLflow link comes from an earlier retry because the run's last retry never reached MLflow. ([#7620](#7620))
 * `databricks air run --help` now shows how to install the databricks-ai-runtime coding agent skill. ([#7652](#7652))
 * `air run --watch -o json` now reports each lifecycle `STATUS` transition once and never reports a non-terminal state after the run has ended, including when logs are served from MLflow artifacts. ([#7621](#7621))
 * `air convert-to-dabs` now explains the `--output-dir` workaround when `code_source.root_path` resolves to the bundle root, and notes when the generated job carries the default `max_retries`. ([#7579](#7579))
 * `air run` now refuses to upload a `code_source` snapshot that selects no files (for example when `root_path` is git-ignored) and explains the cause, and `--dry-run` runs the snapshot file selection and reports the file count. ([#7570](#7570))
 * Repeat the Jobs run link after live log streaming ends. ([#7571](#7571))
 * `air get -o json` includes run details including flat `accelerator_type` and `num_accelerators`. Use `--include-config` to include stored config, which may contain plaintext `env_variables` and parameters; downloads over 1 MiB are omitted, and config-dependent `max_retries` is otherwise null. ([#7624](#7624))
 * `air get` and the `air list` info pane no longer show `Max Retries 0` when the Jobs API leaves the task's retry limit out. For a run submitted with `air run`, the limit now comes from the run's uploaded config, shown as `3 (CLI default)` when the config doesn't set `max_retries`; it shows `N/A` when the limit can't be known (job runs, multi-container runs, legacy runs with no explicit value, or an unreadable config). ([#7623](#7623))
 * Reorganize `databricks air` help: subcommands are grouped by task, `air run` has examples, and YAML fields are listed under headings, with pool fields marked optional and `command`, `compute.num_accelerators`, and `compute.accelerator_type` correctly marked required. ([#7512](#7512))
 * `air run -h config` now lists the environment variables AI Runtime sets on every node (such as `MLFLOW_RUN_ID` and `CODE_SOURCE_PATH`), and `air logs --help` notes that `--download-to` cannot be combined with `--tail` or `--minutes`. ([#7655](#7655))
 * Support full workspace accelerator types in `air list` filters while preserving family matching, and reject invalid filter values. ([#7515](#7515))
 * `databricks air list --all-status` now warns when the AI Runtime run index is unavailable and it falls back to scanning Jobs runs. That fallback scan is capped at 250 runs, and a stuck index request fails after 15 seconds instead of retrying for minutes. `--all-status --filter user=<your email>` now uses the run index instead of scanning the workspace's full run history. ([#7619](#7619))
 * Return structured JSON errors for invalid `air list --filter` values when `-o json` is used. ([#7612](#7612))
 * `air list --all-status` no longer fails when a listed run has been purged. ([#7523](#7523))
 * **Behavior change:** `databricks air logs` now prints the logs available now and exits, also for an active run, matching `kubectl logs`, `docker logs` and `databricks apps logs`. Pass `--follow` (`-f`) to stream new lines until the run completes; `--tail N --follow` prints the last N lines first. `databricks air run --watch` still submits and streams. ([#7658](#7658))
 * `databricks air logs -o json` and `databricks air run --watch -o json` now emit a `WAITING` event, for example `{"type":"WAITING","message":"Waiting for accelerator compute capacity..."}`, when the reported waiting status changes. ([#7695](#7695))
 * `databricks air logs` on a run that ended in the last two minutes now waits for the log index to settle before printing, instead of sometimes dropping lines that were indexed late. ([#7663](#7663))
 * `air logs` and `air run --watch` now print the waiting status (for example `Waiting for accelerator compute capacity...`) as a line on stderr when stderr is not a terminal, instead of printing nothing until the run produces logs. ([#7657](#7657))
 * Route AIR log links to the MLflow Logs page instead of the hidden artifact path. ([#7491](#7491))
 * Invalid `compute.accelerator_type` errors and `air run -h config.compute` no longer list the CLI's built-in accelerator types, which could differ from the workspace's. ([#7520](#7520))
 * `databricks air --help` now notes that GPU pools are not required to run workloads. ([#7581](#7581))
 * `air run` now prints the job run URL with the `?o=<workspace-id>` suffix, matching `air get` and `air list`; `dashboard_url` in `air run -o json` and the `--watch` events gains it too. When `air list` cannot resolve the workspace ID, its links now omit `?o=` instead of ending in `?o=0`. ([#7573](#7573))
 * `databricks air run` now reports an unknown workload YAML key by its field path, suggests the closest valid field, and points to `-h config` instead of naming an internal Go type. ([#7574](#7574))
 * `air run` (including `--dry-run`) now warns before submitting when the `code_source` imports `torch` but PyTorch is not declared: the environment is the Standard environment (version 5 or later) with no `torch` dependency, so the run may fail after it waits for a GPU. ([#7656](#7656))

### Bundles

 * Add `isolation_mode` to the `catalogs` resource, so a catalog can be deployed as `OPEN` or `ISOLATED`. ([#7463](#7463))
 * `bundle validate` no longer warns when resource permissions and top-level or target permissions name the same principal. ([#7291](#7291))
 * Retry bundle file uploads, reads and deletes when the server does not respond within the HTTP timeout ("request timed out after ... of inactivity"). ([#7521](#7521))
 * Show how to recover when `bundle deploy` fails because an app's service principal does not exist or was deleted. ([#7533](#7533))
 * Retry transient server errors when creating Lakebase (`postgres_*`) resources in the direct deployment engine. ([#7557](#7557))
 * Fix `bundle plan` reporting the `spark_conf` and `custom_tags` the backend derives from `is_single_node: true` as drift on clusters. ([#7577](#7577))
 * Stop planning a spurious update for Lakeflow Connect pipelines whose `ingestion_definition.data_staging_options` is filled in by the backend. ([#7603](#7603))
 * Retry the root path check in `bundle destroy` on transient errors, so a dropped connection no longer fails the destroy. ([#7597](#7597))
 * Use the Lakebase branch when its create request times out but the branch was created, instead of failing the deploy, in the direct deployment engine. ([#7602](#7602))
 * Retry transient server errors when deleting resources in the direct deployment engine. ([#7708](#7708))
 * Use the Lakebase project when its create request times out but the project was created, instead of failing the deploy with "already exists", in the direct deployment engine. ([#7747](#7747))
 * Use the feature, model serving endpoint or dashboard that a create request created despite timing out, instead of failing the deploy, in the direct deployment engine. ([#7757](#7757))
 * Use the Lakebase role when its create request fails with a transient error but the role was created, instead of failing the deploy, in the direct deployment engine. ([#7767](#7767))
 * Use the MCP service, model service or model provider service that a create request created despite failing with a timeout, a 499 or a reset stream, instead of failing the deploy, in the direct deployment engine. Create recovery for features, serving endpoints and dashboards now also covers 499 and reset streams. ([#7782](#7782))
 * Retry app updates and deletes in the direct deployment engine when they fail with 400 BAD_REQUEST because the app compute is `UPDATING`, after waiting for the compute to settle. ([#7606](#7606))
 * Enable drift detection for `source_code_path` and `git_source` on apps. ([#6399](#6399))
 * `bundle destroy` and `bundle deploy` no longer fail with "internal error, missing in state" when the state holds an empty-ID entry left by an interrupted recreate in an older CLI. ([#7676](#7676))
 * Fix a feature whose `full_name` contains uppercase letters being recreated on every deploy. ([#7398](#7398))
 * Fix `bundle deployment bind` (and `bundle generate --bind`) failing with `no such node "resources.internal_immutable_snapshots.immutable"` when `workspace.sync_mode` is `immutable`, as reported in [#7306](#7306). ([#7329](#7329))
 * Retry creating the deployment lock (without `--force-lock`) when the request fails with a transient server error, times out ("request timed out after ... of inactivity") or loses its connection ("unexpected EOF"). ([#7594](#7594))
 * Fix a materialization set member whose `feature_name` contains uppercase letters failing to deploy, or recreating the set on every deploy. ([#7398](#7398))
 * Delete the old resource when its name follows a renamed schema. ([#7718](#7718))
 * Fix `pipelines dry-run` starting a real run when given a job KEY, and a crash in its shell completion. ([#7672](#7672))
 * Rename schemas in place; schemas and volumes follow a renamed catalog or schema. ([#7343](#7343))
 * Fix a panic when validating or deploying jobs with local libraries and serverless job clusters. ([#7725](#7725))
 * Fix `tgz` artifacts with `git` set producing an empty tarball or failing when the bundle is in a subdirectory of the git repository. ([#7674](#7674))
 * Apply `presets.trigger_pause_status` and the development mode pause default to `triggers[]` entries on jobs. ([#7450](#7450))

### Dependency Updates

 * Bump dependencies with known vulnerabilities. ([#7750](#7750))
 * Update the Go SDK to [v0.198.0](https://github.com/databricks/databricks-sdk-go/releases/tag/v0.198.0). ([#7530](#7530))
 * Update the Go SDK to [v0.199.0](https://github.com/databricks/databricks-sdk-go/releases/tag/v0.199.0). ([#7584](#7584))
 * Update the Go SDK to [v0.200.0](https://github.com/databricks/databricks-sdk-go/releases/tag/v0.200.0). ([#7653](#7653))
 * Update the Go SDK to [v0.201.0](https://github.com/databricks/databricks-sdk-go/releases/tag/v0.201.0). ([#7769](#7769))
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

AIR Databricks AI Runtime CLI

Projects

None yet

Development

Successfully merging this pull request may close these issues.

3 participants