Skip to content

Tool: Bandwidth Monitor

Ade Ramdani edited this page May 26, 2026 · 1 revision

Bandwidth Monitor

Per-interface real-time RX/TX byte rate with a 60-second rolling area chart.


What it does

Polls if_data.ifi_ibytes and ifi_obytes kernel counters every second, computes deltas, and displays current and peak rates per interface. No elevated privileges required.


Interface

Element Description
Interface tabs One tab per active interface (en0, en1, etc.)
RX rate Current download rate (bytes/s, auto-scaled)
TX rate Current upload rate (bytes/s, auto-scaled)
Peak RX/TX Maximum rate seen in the current session
Chart 60-second rolling area chart with RX and TX overlaid

Chart

  • Area + line with catmullRom interpolation for smooth curves
  • RX and TX displayed with different colors on the same axis
  • Y-axis auto-scales to the peak rate seen — absolute values shown on axis
  • X-axis represents the last 60 seconds

Rate Units

Rates auto-scale:

Rate Display
< 1 KB/s B/s
1 KB – 1 MB/s KB/s
1 MB – 1 GB/s MB/s
≥ 1 GB/s GB/s

Tips

  • Switch interface tabs to monitor individual adapters (e.g., compare Wi-Fi vs Ethernet when both are connected)
  • Peak rate is session-only — resets when you switch tools or relaunch the app
  • A flat chart at 0 with known activity may mean traffic is on a different interface than selected
  • Use alongside Wi-Fi Inspector to correlate signal quality with throughput
  • lo0 (loopback) traffic reflects local inter-process communication, not internet usage

Clone this wiki locally