Skip to content

Tool: Network Interfaces

Ade Ramdani edited this page May 26, 2026 · 1 revision

Network Interfaces

All network interfaces with IPv4/IPv6/MAC addresses, MTU, and up/down status. Auto-refreshes every 3 seconds.


What it does

Reads interface information using getifaddrs() and groups addresses by interface name. Updates automatically every 3 seconds without user interaction.


Interface Table

Column Content
Interface System name (en0, en1, lo0, utun0, etc.)
Type Ethernet, Wi-Fi, Loopback, VPN, etc.
Status Up (green dot) / Down (gray dot)
IPv4 IPv4 address(es)
IPv6 IPv6 address(es), including link-local
MAC Hardware address (where applicable)
MTU Maximum Transmission Unit in bytes

Common Interface Names

Name Description
en0 Primary Ethernet or Wi-Fi
en1 Secondary network interface
lo0 Loopback (127.0.0.1)
utun0–utunN VPN tunnel interfaces
bridge0 Network bridge (e.g., for VMs)
awdl0 AirDrop/AirPlay (peer-to-peer Wi-Fi)

Tips

  • Down interfaces are shown dimmed — useful for spotting disabled adapters
  • Multiple IPv6 addresses on one interface is normal (link-local + global)
  • MTU 1500 is standard Ethernet; lower values may indicate VPN overhead or legacy hardware
  • awdl0 and llw0 are Apple internal interfaces — usually safe to ignore
  • Refresh is automatic; no need to manually reload

Clone this wiki locally